3d Tebee 's articulated railcar with 5 window tralier Both Full & half cabs

[Brian Mosby]

today arrived my next 3d print build it's a articulated railcar  half cab & 5 window trailer

heres it as it comes
the Cab
100_8018 by brian mosby, on Flickr

100_8019 by brian mosby, on Flickr

100_8020 by brian mosby, on Flickr

100_8021 by brian mosby, on Flickr

Trailer
100_8022 by brian mosby, on Flickr

100_8023 by brian mosby, on Flickr

100_8024 by brian mosby, on Flickr

the next lot is with the cab fitted with the Kato 103 chassis & a old Farish bogie sitting on the New Peco set track curve
100_8026 by brian mosby, on Flickr

100_8027 by brian mosby, on Flickr

100_8028 by brian mosby, on Flickr

I now need to get the primmer & paint

[Brian Mosby]

Been to Halfords today to get some assorted paints
which means the I can make a start on the railcar by giving it a coat of filler primmer

photos later

[Brian Mosby]

Here are the photos with a coat of primmer on ready for a quick sanding
100_8041 by brian mosby, on Flickr
100_8042 by brian mosby, on Flickr
100_8043 by brian mosby, on Flickr
100_8044 by brian mosby, on Flickr
100_8045 by brian mosby, on Flickr
100_8046 by brian mosby, on Flickr
100_8047 by brian mosby, on Flickr

[Brian Mosby]

And here are photos after sanding & a 2nd coat of filler primmer
100_8050 by brian mosby, on Flickr
100_8051 by brian mosby, on Flickr

[Richard Lindsay]

Is there room to apply some weight around the motor bogie?

[Brian Mosby]

Is there room to apply some weight around the motor bogie?

there is room in the bonnet & in the coach body over the kato 103 chassie

[Brian Mosby]

Last night I sprayed the cream top part of the livery which I used Halford's Rover Primula Yellow
100_8053 by brian mosby, on Flickr
100_8054 by brian mosby, on Flickr


I then masked off using Tamiya masking tape followed with a coat of Halfords Vauxhall Carmine Red
100_8055 by brian mosby, on Flickr

& once that is dry I will be masking off the lower body work so I can paint the roof & beading black

[Brian Mosby]

& masked off & sprayed black
100_8057 by brian mosby, on Flickr

[Brian Mosby]

having De-masked the railcar I am happy with the outcome
100_8058 by brian mosby, on Flickr

100_8059 by brian mosby, on Flickr

[Brian Mosby]

last update for a bit I still need to fit glazing & seating

the bogie under the coach is a old farish one I need to find one to replace this
100_8063 by brian mosby, on Flickr

100_8062 by brian mosby, on Flickr

100_8061 by brian mosby, on Flickr

100_8060 by brian mosby, on Flickr

[Brian Mosby]

Is there room to apply some weight around the motor bogie?

there is room in the bonnet & in the coach body over the kato 103 chassie

heres a photo to show how much room there is in the cab
100_8121 by brian mosby, on Flickr


Also you can see I have found time to add glazing

[Brian Mosby]

Almost there still need to fit a driver & his seat
But I have added the glazing & seating
100_8122 by brian mosby, on Flickr
100_8123 by brian mosby, on Flickr
100_8124 by brian mosby, on Flickr
100_8125 by brian mosby, on Flickr
100_8126 by brian mosby, on Flickr
100_8127 by brian mosby, on Flickr


If anyone would like to have a look at this I will have it with me this weekend at the
East Midlands and South Yorkshire Groups of the 009 Society Members

[Jeff Schumaker]

It turned out very well. A most impressive paint job.

Jeff S.

[Frank]

I must say that looks very nice indeed Mozzer.

Frank

[Brian Mosby]

thanks