3d Tebee 's articulated railcar with 5 window tralier Both Full & half cabs

[Brian Mosby]

Today A 2nd of Tebee's Irish Railcars arrived
the chassis mount base plate is nice & firm Now that he has added the bracing
I will be changing the Rad on this one & the 1/2 cab I all ready built for a ex road wagon/bus type this is not the there is anything wrong with the ones on Toms prints
here are some photos of the 2nd railcar as it comes from shapeways
IMG_20151214_155555 by brian mosby, on Flickr
IMG_20151214_155609 by brian mosby, on Flickr

Heres a photo with the new rad just sat in place I will need to remove the printed one
IMG_20151214_155724 by brian mosby, on Flickr

& heres the one I am thinking of using on the one I built in July
IMG_20151214_155814 by brian mosby, on Flickr

The chassis has been orded But until then I can get on with Cleaning up &  painting the body if my arm will let me

[Brian Mosby]

Now with my trapped nerve using my left arm is painful but doing notting is doing my Head in so I have lightly sanded the print followed by a coat of gray primer & another light sanding then a 2nd coat of primer
2015-12-16_02-04-55 by brian mosby, on Flickr

once dry I gave the  prints a coat od Halfords Rover Primula Yellow & is now sat on top of the room radiator drying

IMG_20151216_140851 by brian mosby, on Flickr

IMG_20151216_140937 by brian mosby, on Flickr

[Jeff Schumaker]

Brian,

What is the source of the rad casting?

Jeff S.

[Brian Mosby]

Brian,

What is the source of the rad casting?

Jeff S.

The rad casting I got from Langley Models at a show as they have a tray with a assortment of them in
there not shown on there web site lose

[Brian Mosby]

I have managed to mask off the cream ready for the red paint which is Halfords Vauxhall Carmine Red
Which I have also sprayed
IMG_20151217_115745 by brian mosby, on Flickr
IMG_20151217_115750 by brian mosby, on Flickr
2015-12-17_12-00-37 by brian mosby, on Flickr

there now drying on the room radiator All been well I may get the black paint done later today 

[Brian Mosby]

 I have now masked off the red & sprayed the black paint
IMG_20151217_164807 by brian mosby, on Flickr
IMG_20151217_164811 by brian mosby, on Flickr
IMG_20151217_165056 by brian mosby, on Flickr

Now about to have my Tea after that I will take off all the masking to reveal the livery
More latter

[Brian Mosby]

& here's the last update for today photos with the masking removed
IMG_20151217_175211 by brian mosby, on Flickr
IMG_20151217_175342 by brian mosby, on Flickr
IMG_20151217_175323 by brian mosby, on Flickr

[Brian Mosby]

both railcars together the new one is on blocks to razz it up
2015-12-17_08-04-38 by brian mosby, on Flickr

[Brian Mosby]

the chassis has arrived in todays post

[Frank]

Brian,

I have to say that post on how you did the livery is extremely useful and I will use that next time I do a livery like that.   Thanks very much for posting.

It's all looking very good indeed.

Frank