Coombe Bridge On the Longroyd Bridge & Bargate Railways

[Brian Mosby]

heres a photo showing the 2nd side attach to the 1st using the claps
100_8198 by brian mosby, on Flickr

& here are the 1st 4 boards bolted together in the loft
100_8199 by brian mosby, on Flickr

right way up
100_8200 by brian mosby, on Flickr
100_8201 by brian mosby, on Flickr
100_8202 by brian mosby, on Flickr


as I now have more space to play with I have been playing around with track & buildings

right hand exit behind the big mill
100_8204 by brian mosby, on Flickr

smaller mill, Station & sheds no turntable
100_8205 by brian mosby, on Flickr

[tedp]

They look extremely light and strong. I wonder if he makes straight ones - about 50x100cms?

[Brian Mosby]

They look extremely light and strong. I wonder if he makes straight ones - about 50x100cms?

at the moment he is not taking on new designs  so he can catch up but can take orders for the base board kits that are on is web site

he has  one 60x120cm
http://www.timhorn.co.uk/4ft-by-2ft-lite-baseboard/

[tedp]

He does 80x25cms - these might be combined into 80x50. Still a bit small for what I would like to do.

[Brian Mosby]

He does 80x25cms - these might be combined into 80x50. Still a bit small for what I would like to do.

if you can wait till October Tim hopes to start taking orders again to make boards to the size you want made

[Brian Mosby]

now all built just need the timber for the legs

[Brian Mosby]

just picked up the timber for the legs & now off up in to the loft to make a start on them

[Brian Mosby]

the legs are now done Next is the track laying but I will need to order some more points & N gauge track for the fiddle yard


there are full with legs ever 2 board joints & just a leg on the outside on the other 4
100_8218 by brian mosby, on Flickr

100_8220 by brian mosby, on Flickr

100_8221 by brian mosby, on Flickr

100_8222 by brian mosby, on Flickr

100_8223 by brian mosby, on Flickr

the baseboard tops are 100cm high

[Brian Mosby]

I have now on order 7 extra points so I will end up with
a 4 track fiddle yard
2 sidings at the mills & 5 at the loco sheds
plus a run round at the station

[Graeme Dunbar]

That looks really impressive and not at all like the "Mannin Middle" image in my mind from your first post.

From the floor level (or is that sub-floor/ceiling?) view it looks like the Mother Ship has landed!

And it's taking operating/viewing height (discussed elsewhere) too far... :-)

[Brian Mosby]

That looks really impressive and not at all like the "Mannin Middle" image in my mind from your first post.

From the floor level (or is that sub-floor/ceiling?) view it looks like the Mother Ship has landed!

And it's taking operating/viewing height (discussed elsewhere) too far... :-)

I had my head throw the loft hatch to take the photo

[Brian Mosby]

made a start laying the track & got as far as the 1st point for the station run round as I have now run out of right hand points till the new ones on order arrive

1st mill & its siding

100_8225 by brian mosby, on Flickr
100_8228 by brian mosby, on Flickr
100_8229 by brian mosby, on Flickr

2nd mill & its siding plus sowing how the track will be surrounded by stone walling
100_8226 by brian mosby, on Flickr
100_8227 by brian mosby, on Flickr



100_8230 by brian mosby, on Flickr

100_8231 by brian mosby, on Flickr

100_8232 by brian mosby, on Flickr

100_8233 by brian mosby, on Flickr

100_8234 by brian mosby, on Flickr

what do you all think ??

[theelliotts]

Immmmmpresive!

David E

[Brian Mosby]

Immmmmpresive!

David E

thanks

[Jeff Schumaker]

It's coming together well. Looking forward to more photos of your progress.

What can you tell me about the center cab loco in several of the photos?

Jeff S