Home 3D Printing

[greybadger]

Some of you will be aware that I use 3D printing as an aid to developing my kits and drives for some time now.  I have also explored the possibility of constructing a complete 009 model using an entry level Fused Filament Fabrication type home 3D printer.

Now I certainly do not advocate one should rush out and buy a 3D printer as there is a steep learning curve to achieving consistent results and you do need to know what printer to purchase. What I do foresee is clubs and groups possibly acquiring printers and pooling technical expertise to exploit the potential. The ability to produce the required CAD files is something currently few modellers will have but is quite likely to be found amongst club members. A

[Frank]

Absolutely fascinating Brian, many thanks for posting this.

I am sure that 3D printing has a major part to play in the future of our hobby.

Frank

[MickT]

Same as wot Frank said! Excellent progress and a fascinating subject Brian!

Mick

[tedp]

The component approach is definitely the way to go.

[Retiarius]

Nice article Brian.

[Elmgate]

Thank you Brian. Most informative. Look forward to the continuation!

[gtmspyder]

Thank you for that very informative article Brian, I look forward to it's continuation with great anticipation.

Kind regards,

BrianT.

[tedp]

It is a new technology which is certainly going to make its mark. It is as Brian says - the expertise of using a tool such as this is something to be learned before it's going to be any use.

If you have experience of CAD tools,or even drawing tools, I expect it won't be terribly difficult. I think it can be compared to the level of expertise needed to scratchbuild a locomotive from brass using a soldering iron and a lathe. Part of the process must be experimenting to arrive at a set of parts that fit together. But instead of seeing what you are assembling from raw materials, you have to visualise it in your mind and design the parts on a computer screen before running the printer.

[F2Andy]

Is there going to be a market for CAD files soon?

[invercloy]

That's a nice looking prototype, Brian ;)

[greybadger]

Just updated my Home 3D printing pages with 'Welsh Pony' test print details. Chassis is one of a new series along with small England and Dolgoch becoming available in the Autumn.

http://www.madge00n3.co.uk/3DPrinting/3d08.htm

Brian Madge

[Frank]

Many thanks for posting this Brian.

This is a fascinating development to watch.  I am sure that 3D printing will revolutionise the hobby, less sure what the future will look like!    It is fascinating to see what can be achieved though, and the techniques being developed.

Frank

[Scott Rixon]

That's amazing!

[Krizzy]

Brian

Many thanks for posting the best insight into the mysteries of 3D Printing so far. I for one now have a better understanding.

Thanks again

Roger