Advise please; controller for Minitrains

[Hugh Norwood]

Not a bad idea, Hugh. If it can be switched on and off so it won't damage coreless motors you'd have the best of both worlds.

Will you come to Sparsholt? If so, we could try and hook up one of your PWM controllers to Dunalistair.

I have a diary clash at the moment for 9th April...
Just in case I can get to Sparsholt, what type of connector do you use to connect your controllers to your layout?

[tedp]

DIN 270 degrees, looking into the rear end of plug (where you solder the leads) the AC input is on the left, the centre one is unused, the two on the right are for the DC output.

[Gerhard Novak]

Found the book - as I said Google finds everything... Modelleisenbahnen elektronisch gesteuert.  Band 2: Impulssteuerungen, NF - Zugbeleuchtung und Peripherie - Elektroniken. Author Knobloch, Winfried. ISBN 10: 3790502952

For those who are not so familiar with German: Model railways - electronically controlled. Part 2: Impulse control, LF train light, periphery circuits.

@ Ted: Well my father didn't hear it as he was working... It is fun to play with a frequency generator and create all kind of sounds.