Trackwork needed

[Tim Hale]

Hi,

My start in HOe seems to have faltered, is there any possibility of finding a reliable supplier of basic track components and gauges? I just need gauges, rail and pcb sleepers.

Thank you

Tim

[Stan Williams]

Tim,

Although sometime ago, I purchased my track gauge from N Gauge Models.

Eileens Emporium have in the past stocked PCB sleepers.

Not sure regarding the rail, but above may help.

Stan.

[engerth399]

Hi,
I've bought lengths of rail from Peco in the past, don't know if they supply all the profiles that are in the ready-made track.
Peter

[B.Meldon]

FYI

PECO IL-1 is code 60 Nickel silver flat bottom rail (6x 24 inch lengths for about

[Turin 60]

Try "Marcway" at Sheffield, certainly for rail and pcb sleepers. No connection other than a satisfied customer.

John Bruce.

[Tim Hale]

Hi,

Rail and sleepers sourced but cannot find a rail bender or three-point 9mm track gauges........

Tim

[B.Meldon]

I have not used them myself and I can not vouch for their quality or accuracy as I use one made on a lathe but perhaps these may help:

Code 80: https://www.dccconcepts.com/product/roller-gauge-whandle-n-scale-standard-9mm-2-pack/

Code 75: http://motorbogies.com/index.php?main_page=product_info&cPath=19_31&products_id=212


Brian Meldon