A1 Models 3d printed Fowler 0-6-0

[Brian Mosby]

At todays 009 open day in Mansfield A1 models are now making 3 types of 3d printed body kits I picked up the 1930's Fowler which uses the Farish new 08 chassis
here are photos as the kit comes I have just given the body a coat of primmer & once dry I will post a new photo so the detail can be seen
100_8133 by brian mosby, on Flickr


100_8134 by brian mosby, on Flickr

[Brian Mosby]

Here are the photos of the body in primmer
100_8135 by brian mosby, on Flickr

100_8136 by brian mosby, on Flickr

100_8137 by brian mosby, on Flickr

as can be seen in the 3rd photo there is a small amount of stepping on the roof but a quick file will get rid of this

[Darren Hedges]

Here's a couple of photos showing my Fowler being built to fit a Farish class 14 chassis.

Regards,
Darren.

WP_20150719_22_33_49_Pro by Darren Hedges, on Flickr

WP_20150719_22_25_58_Pro by Darren Hedges, on Flickr

[Brian Mosby]

A1 models fowler body I still need to build the frames & buffer beam
100_8145 by brian mosby, on Flickr

CW Railways RNAD waiting the arrival of a 104 chassis from Japan
100_8144 by brian mosby, on Flickr

CW Railways Pechot Bourdon still need handrails fitting & again waiting the arrival of a 106 chassis from Japan
100_8143 by brian mosby, on Flickr

[Brian Mosby]

& heres the footplate/frames for the Fowler
100_8148 by brian mosby, on Flickr
100_8149 by brian mosby, on Flickr
100_8150 by brian mosby, on Flickr

[Brian Mosby]

I have added Liquid Gravity to the body
100_8151 by brian mosby, on Flickr

the underframes have been sprayed with gray primmer
100_8152 by brian mosby, on Flickr

100_8153 by brian mosby, on Flickr

100_8154 by brian mosby, on Flickr

I have just given the frames a coat of Halfords Satin black

[Brian Mosby]

Quick update here the body sat on the freshly painted chassis/footplate
100_8155 by brian mosby, on Flickr
100_8156 by brian mosby, on Flickr
100_8157 by brian mosby, on Flickr
100_8158 by brian mosby, on Flickr

[Brian Mosby]

today I have added some detail
Cab steps there from a Bachmanns OO 08 shunter cab steps
& I have added a jack both sides
100_8165 by brian mosby, on Flickr

100_8166 by brian mosby, on Flickr

100_8167 by brian mosby, on Flickr

100_8168 by brian mosby, on Flickr

next will be a light weathering

[Brian Mosby]

here the last up date on the Fowler

all done here are some art'y photos
100_8171 by brian mosby, on Flickr

100_8170 by brian mosby, on Flickr

100_8169 by brian mosby, on Flickr

100_8174 by brian mosby, on Flickr

100_8173 by brian mosby, on Flickr

100_8172 by brian mosby, on Flickr

[Jeff Schumaker]

Beautiful work.

Jeff S

[theelliotts]

But where is the loco driver?

David E

[peter61]

Hello gentlemen!
Where can I buy this body-kit?

Greetings, Peter

[Darren Hedges]

Hello gentlemen!
Where can I buy this body-kit?

Greetings, Peter

Hi Peter.

It is an A1 Models bodykit, designed to fit on the o/s framed Farish class 08.

Give John a ring or drop him an email for details on how to order or what shows he is attending. He will be at ExpoNG in October, but that's the only one I know for sure.

http://www.a1modelsuk.com/

I have done one on the Farish class 14 chassis, very simple but effective conversion.

WP_20150731_23_04_37_Pro by Darren Hedges, on Flickr

Regards,
Darren.

[Brian Mosby]

But where is the loco driver?

David E

I have run out just need to pickup a load