Mini cranks

[B.Meldon]

This is a bit off topic.....

Dear Brian
The Technomodel you posted here- is this HOe and if so do you know where to buy? I tried searching the name but didn't find anything like the picture you posted.
Many thanks,

Yes it is a ready to run H0e loco. They cost about

[David Prime]

Thanks Brian very helpful of you !  Cheers !

[jimowers]

You will find the Bemo 0-6-0 cheaper and in two different versions at Modellbahnshoppe-Lippe http://www.modellbahnshop-lippe.com/index.asp?l=gb. I have always found them very good when I have bought Bemo stuff. They have the black one: 1013807 and also the green: 1013804 at 599.90 Euro.

[B.Meldon]

You will find the Bemo 0-6-0 cheaper and in two different versions at Modellbahnshoppe-Lippe http://www.modellbahnshop-lippe.com/index.asp?l=gb. I have always found them very good when I have bought Bemo stuff. They have the black one: 1013807 and also the green: 1013804 at 599.90 Euro.

Here are a couple of direct links to the two Bemo locos :

http://www.modellbahnshop-lippe.com/produkt/Bemo/37-9-003001-84945-0-0-0-25-1-2-0-gatt-gb-p-0/ein_produkt.html

http://www.modellbahnshop-lippe.com/produkt/Bemo/37-9-003001-84944-0-0-0-25-1-2-0-gatt-gb-p-0/ein_produkt.html

Brian Meldon

[duttonbay]

This is a bit off topic.....

Yes, it is a bit off-topic, but a most interesting looking locomotive and available RTR in HO scale!  Are you able to tell me the wheel diameters and spacing? Does the mechanism fill the side tanks, or would it be possible to scratch build a tender loco to fit on the chassis?