hi all
i am lookign for a supplier of copper clad sleepers. I need 30 to match (in size) 009 crazytrack.
Does anyone know of a supplier for them? I know I could make my own from larger pieces but in the past I have had trouble cutting them without them snapping or looking awful!
thanks
Hi Richard
I have never managed to find the correct thickness to match the Peco track exactly.
All the PCB sleepers that I have used have been slightly too thin and need spacing, but others may have found otherwise.
Brian Meldon
Buy a piece of blank PCB board and cut strips from it, then divide them into separate sleepers. I have done so many times and they fit all right. I epoxied them next to the cross-baseboard gaps, gapped each sleeper and soldered the rails on top:
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Fwww.009dutch.nl%2Farchive%2F2003%2Frae%2520bridge%2Fbb52.jpg&hash=8d3a3d1366d3998666afd8ac976150ad93432d5a)
Have you tried the usual suppliers? C+L appear to stock a variety of copper clad material - not that I've used them.