Wanted, to Buy - Peco L&BR vans and opens, in scrap condition.
Dear All,
Some time back, a load of my Peco L&BR vans and open wagons were damaged in an accident overseas. I am in need of some spares, namely van and wagons floors, with the locating tabs for chassis and axles. The wagon can be a scrapper, damaged, disfigured, mutilated, whatever, and the tabs don't even need to be attached - just so long as they are included.
As the Society Sales do not normally buy-in scrap models, wrecks, etc. (no jokes please...) it was suggested I post a request here. If you have any failed conversions, unwanted bodies, paint jobs that went wrong, crunched-under-foot accident cases, please drop me a line and let me know.
Kind Regards,
Andrew (Arthur Daly) Emery
Hi there,
Have you asked Peco....
I've been able to get odd bits of kits from them in the past.
Mainly buildings bits I will admit
But - If you don't ask.....
Thanks
I can not offer you anything I do have a load of L&B PECO rolling stock but all still pristine as we still await the locos!!
However may I suggest that you try posting on www.rmweb.co.uk forum where there is a wanted section, which is quite useful for finding items are receiving info from members where things may be obtained.
If you check the bottom of the forums pages you will note that usage is quite high with sometimes several hundred modellers on line!
Joining the forum is fast and free.
Regards Steve
Quote from: Steve Lewis on April 06, 2017, 21:58
I can not offer you anything I do have a load of L&B PECO rolling stock but all still pristine as we still await the locos!!
However may I suggest that you try posting on www.rmweb.co.uk forum where there is a wanted section, which is quite useful for finding items are receiving info from members where things may be obtained.
If you check the bottom of the forums pages you will note that usage is quite high with sometimes several hundred modellers on line!
Joining the forum is fast and free.
Regards Steve
Thanks Steve, much appreciated.
Andrew
Hi Andrew
If you do get to look at RMWeb forum you will find there is quite a bit of Narrow Gauge interest both model & prototype, in the Narrow Gauge section towards the bottom of the Forums list
(Some very nice pictures of a Welshpool & Llanfair layout on currently)
Steve