At the Rainhill show I picked up one of the new 3d printed railcars
heres what you get
(https://farm1.staticflickr.com/666/22750849833_7a7bd4d699_c.jpg) (https://flic.kr/p/AEq42B)IMG_20151128_202419 (https://flic.kr/p/AEq42B) by brian mosby (https://www.flickr.com/photos/mozzer36/), on Flickr
(https://farm6.staticflickr.com/5794/22750851023_cf00c14035_c.jpg) (https://flic.kr/p/AEq4o8)IMG_20151128_202426 (https://flic.kr/p/AEq4o8) by brian mosby (https://www.flickr.com/photos/mozzer36/), on Flickr
Not a bad print but the roof needed a little work to smooth it
I am needing a chassis which is a Kato 103 but I have got the body spray painted & jut need to paint the rad & fit glazing
(https://farm6.staticflickr.com/5802/23395364306_13ac691178_c.jpg) (https://flic.kr/p/BDnmJ7)IMG_20151130_130927 (https://flic.kr/p/BDnmJ7) by brian mosby (https://www.flickr.com/photos/mozzer36/), on Flickr
(https://farm1.staticflickr.com/619/23313095472_75da227c68_c.jpg) (https://flic.kr/p/Bw6H4W)2015-11-30_01-11-55 (https://flic.kr/p/Bw6H4W) by brian mosby (https://www.flickr.com/photos/mozzer36/), on Flickr
Brian,
What did you do to smooth the print?
Jeff S.
I just sanded the roof lightly with fine sandpaper
Brian,
Is that railbus from A1, I checked their website & they only show the usual brass models, no railcar.
I followed your blog for quite a while and was inspired by it to try some of the other 3D prints from TeeBee.
Thanks,
Bernard
Quote from: BernardH44 on April 27, 2016, 04:25
Brian,
Is that railbus from A1, I checked their website & they only show the usual brass models, no railcar.
I followed your blog for quite a while and was inspired by it to try some of the other 3D prints from TeeBee.
Thanks,
Bernard
Yes its by A1 models he now has around 5 or 6 3D printed bodys
Give A1 a email for details
Quote from: BernardH44 on April 27, 2016, 04:25
Brian,
Is that railbus from A1, I checked their website & they only show the usual brass models, no railcar.
I followed your blog for quite a while and was inspired by it to try some of the other 3D prints from TeeBee.
Thanks,
Bernard
there is also this railcar Again by A1
(https://farm2.staticflickr.com/1608/25811163606_95d3ccbf81_z.jpg) (https://flic.kr/p/FjQXGb)IMG_20160316_161317 (https://flic.kr/p/FjQXGb) by brian mosby (https://www.flickr.com/photos/mozzer36/), on Flickr
Quote from: BernardH44 on April 27, 2016, 04:25
Brian,
Is that railbus from A1, I checked their website & they only show the usual brass models, no railcar.
I followed your blog for quite a while and was inspired by it to try some of the other 3D prints from TeeBee.
Thanks,
Bernard
I think i have Found A1 models on ebay as I sent him photos of his kits I have built & they have been used on the listing
http://www.ebay.co.uk/sch/Other-Narrow-Gauge-/9037/m.html?item=141972796996&hash=item210e3cf644%3Ag%3AXZQAAOSwGYVXBLWz&_ssn=pussinflipflops2012
Thanks Brian,
I didn't find his items on e-bay, but picked up his e-mail address & sent him an e-mail.
The only other A1 models I came upon is the site for the folded brass models.
Cheers,
Bernard
Quote from: BernardH44 on May 10, 2016, 22:24
The only other A1 models I came upon is the site for the folded brass models.
Cheers,
Bernard
It's the same A1 Models Bernard.
Regards,
Darren.