009 Society Members Forum

Modelling => Locomotives => Topic started by: Brian Mosby on February 07, 2014, 16:29

Title: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 07, 2014, 16:29
Today arrived two of Tebees 009 cheap and easy railcars it is made to fit the Kato 11-103 chassie

http://www.shapeways.com/model/1658488/009-short-single-ended-railbus.html?materialId=6&li=ostatus

I will not be using the 103 chassis but will be using the 104 & unpowered 104 chassis that comes in the loco & 2 coach set the 2 body will run as a 2 car set
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3817%2F12136503456_cb4cb0e297_c.jpg&hash=c727715e4ae3299a217d8a332455fbb43cdc4692) (http://www.flickr.com/photos/mozzer36/12136503456/)
100_6702 (http://www.flickr.com/photos/mozzer36/12136503456/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2843%2F12135836735_310d32c948_c.jpg&hash=937c7e6d22d496ee6999d124fbb683a0bd0e73c0) (http://www.flickr.com/photos/mozzer36/12135836735/)
100_6703 (http://www.flickr.com/photos/mozzer36/12135836735/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3785%2F12136496126_42efd18b85_c.jpg&hash=67e8221614e934a12f51cd322e9c9a572d71d79d) (http://www.flickr.com/photos/mozzer36/12136496126/)
100_6704 (http://www.flickr.com/photos/mozzer36/12136496126/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

heres the body
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2889%2F12366113725_1b310a6173_c.jpg&hash=81910657f4bdd3eedc1e7c8b499d4d8e80fdb6b6) (http://www.flickr.com/photos/mozzer36/12366113725/)
100_6740 (http://www.flickr.com/photos/mozzer36/12366113725/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7426%2F12366281193_2bbe131140_c.jpg&hash=1385946e22a32176b0653e4ca30ec7c908471302) (http://www.flickr.com/photos/mozzer36/12366281193/)
100_6741 (http://www.flickr.com/photos/mozzer36/12366281193/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

So far i have i have given the bodys a coat of Halfords filler primmer
more to follow
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 07, 2014, 20:21
here are some photos of the bodys in filler primmer the one on the right has been sanded
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2822%2F12369776985_7125bcb677_c.jpg&hash=c2fbac22f4937654d1d44f5b1ced073a14a8496e) (http://www.flickr.com/photos/mozzer36/12369776985/)
100_6742 (http://www.flickr.com/photos/mozzer36/12369776985/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3806%2F12369935873_e316590340_c.jpg&hash=1bb50e0bb82aa7e182ae3ed9cdc375e7bc562b99) (http://www.flickr.com/photos/mozzer36/12369935873/)
100_6743 (http://www.flickr.com/photos/mozzer36/12369935873/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

then 2nd one has been sanded & both have had a 2nd coact of filler primmer
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 08, 2014, 19:28
I have again sanded/filed the bodys so far the time taken is a total of 15 min for each body

the body have now had a coat of gray primer & sometime tomorrow the bodys will get the upper colour sprayed on this is Rover Primula yellow (GWR cream) then monday i will mask this off & paint the lower 1/2 Vauxhall Carmine red

like this
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3817%2F12390812515_d361d431a2_m.jpg&hash=9df949bd7d0bc99ce1a0fa86d02eba0a1306d0bf) (http://www.flickr.com/photos/mozzer36/12390812515/)
100_6744 (http://www.flickr.com/photos/mozzer36/12390812515/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 08, 2014, 20:00
heres is one of the bodys in gray primmer
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7398%2F12391386575_435662c215_m.jpg&hash=c591aa426a61c2d8e6d8dfaa25f0ad737cbe07cb) (http://www.flickr.com/photos/mozzer36/12391386575/)
100_6745 (http://www.flickr.com/photos/mozzer36/12391386575/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7438%2F12391829864_f2b6fd21cf_m.jpg&hash=d03559b1350c07d01736cb362447334b906dce90) (http://www.flickr.com/photos/mozzer36/12391829864/)
100_6746 (http://www.flickr.com/photos/mozzer36/12391829864/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 09, 2014, 18:59
got more done late last night the body got a coat of the Rover Primula yellow
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm6.staticflickr.com%2F5485%2F12415396114_b3f63b9fde_c.jpg&hash=0006366bf707442c3b15ad8e374c84fbce481df9) (http://www.flickr.com/photos/mozzer36/12415396114/)
100_6747 (http://www.flickr.com/photos/mozzer36/12415396114/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

then 1st thing today i masked off the upper body & gave it a coat of Vauxhall Carmine red
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm6.staticflickr.com%2F5475%2F12414908265_df54a0df0a_c.jpg&hash=f5f6abf416ff502cf6e6b0c3ce685e795cb69adb) (http://www.flickr.com/photos/mozzer36/12414908265/)
100_6748 (http://www.flickr.com/photos/mozzer36/12414908265/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

then tonight i have masked off the lower body
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7396%2F12415393234_d87f0482b2_c.jpg&hash=d9c6afec044a73357453b77f693e7b51685ace00) (http://www.flickr.com/photos/mozzer36/12415393234/)
100_6749 (http://www.flickr.com/photos/mozzer36/12415393234/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

& then sprayed it all black
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3719%2F12415051503_0cf6a00e13_c.jpg&hash=623e805b5aaed032623fb21cb514bbdbd189c739) (http://www.flickr.com/photos/mozzer36/12415051503/)
100_6750 (http://www.flickr.com/photos/mozzer36/12415051503/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

Then after 10 min's to dry i started to take of the masking
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2865%2F12415390104_b693e0534d_c.jpg&hash=d69e399eb7d915a5fce8729ca1c3d9a16f54f358) (http://www.flickr.com/photos/mozzer36/12415390104/)
100_6751 (http://www.flickr.com/photos/mozzer36/12415390104/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

then the rest
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2830%2F12415388924_b01b584ed9_c.jpg&hash=f648b8df856245ace6fedf62037ba47daac12e99) (http://www.flickr.com/photos/mozzer36/12415388924/)
100_6752 (http://www.flickr.com/photos/mozzer36/12415388924/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

heres trhe 2 bodys just sat on the chassis i need to make a mount as the body id made to sit on the kato 11-103 & i am using the 11-104
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3737%2F12415047143_90e83efc57_c.jpg&hash=f87494565242311507f3bfec6a36d889998ebf8c) (http://www.flickr.com/photos/mozzer36/12415047143/)
100_6753 (http://www.flickr.com/photos/mozzer36/12415047143/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7440%2F12414899245_c6fd5de676_c.jpg&hash=b05e6d69c33cc6cdd52349c94491db32ec16540c) (http://www.flickr.com/photos/mozzer36/12414899245/)
100_6754 (http://www.flickr.com/photos/mozzer36/12414899245/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 09, 2014, 19:59
I have still to paint the radiater & glaze the bodys
I have today picked up at doncaster show some works plates to add to the rear of the railcars & some brass air horns for the roof then fit seating it looks like i will 3 rows of 2+1 then a bench seat across the back & a center seat at the front for the driver
Title: Re: 3D Printed railcar By Tebee
Post by: tedp on February 09, 2014, 22:02
Shades of the County Donegal? Very neat work, Brian. The car spray works very well.
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 09, 2014, 22:06
Quote from: tedp on February 09, 2014, 22:02
Shades of the County Donegal? Very neat work, Brian. The car spray works very well.

the filler primmer did the work 1st
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 10, 2014, 21:00
tonight i have mounted the chassis & made a start adding detail
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3832%2F12442625145_e7549706a3_c.jpg&hash=9bf8b3a9784b4f0e8322f6c0b895f218afe9ebab) (http://www.flickr.com/photos/mozzer36/12442625145/)
100_6755 (http://www.flickr.com/photos/mozzer36/12442625145/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm4.staticflickr.com%2F3814%2F12443101134_6119d24728_c.jpg&hash=4427b43ae7f5de08e2016230b5456c8cedd8a8d8) (http://www.flickr.com/photos/mozzer36/12443101134/)
100_6756 (http://www.flickr.com/photos/mozzer36/12443101134/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm6.staticflickr.com%2F5502%2F12443099004_0357a29b0e_c.jpg&hash=7a7fb2c94ad62bda4b0d6dff636272623dcea188) (http://www.flickr.com/photos/mozzer36/12443099004/)
100_6757 (http://www.flickr.com/photos/mozzer36/12443099004/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

I have cut in 2 some standard gauge coach underframe tanks to use as fuel tanks & fixit then to the chassis
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7456%2F12442618355_352c5a6f51_c.jpg&hash=6faa627fddea14b3eb02701ce14f4ba146d85c0c) (http://www.flickr.com/photos/mozzer36/12442618355/)
100_6758 (http://www.flickr.com/photos/mozzer36/12442618355/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2884%2F12442750583_43dc8f6149_c.jpg&hash=9859ab62c262087752770c5375ea117af5641d54) (http://www.flickr.com/photos/mozzer36/12442750583/)
100_6759 (http://www.flickr.com/photos/mozzer36/12442750583/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 10, 2014, 22:07
got some more done but that it for tonight

the horns fitted & fuel tanks painted

(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm3.staticflickr.com%2F2839%2F12443746375_7478ac69bb_c.jpg&hash=616cc7e7041cb1ae6176c83307d75371001e8453) (http://www.flickr.com/photos/mozzer36/12443746375/)
100_6760 (http://www.flickr.com/photos/mozzer36/12443746375/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

No's fitted
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7334%2F12444223544_6293677e4b_c.jpg&hash=301589895a3d2eac53544ac145e470d928d24313) (http://www.flickr.com/photos/mozzer36/12444223544/)
100_6761 (http://www.flickr.com/photos/mozzer36/12444223544/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

& Works plates fitted to the back of the railcars
(https://forum.009society.com/proxy.php?request=http%3A%2F%2Ffarm8.staticflickr.com%2F7441%2F12443876143_93409bb72b_c.jpg&hash=b15ffdfafa39330e1459ff396485a9dc81598c9b) (http://www.flickr.com/photos/mozzer36/12443876143/)
100_6762 (http://www.flickr.com/photos/mozzer36/12443876143/) by Mozzer models (http://www.flickr.com/people/mozzer36/), on Flickr

still need to fit the glazing & seats
Title: Re: 3D Printed railcar By Tebee
Post by: tedp on February 10, 2014, 22:24
Better still, Brian. What kind of couplers will you fit to the ends?

Just an idea - with both units permanently coupled, it might be possible to add working lights (http://www.009dutch.nl/archive/2005/img/railbus/pict3127.jpg). I did so using LEDs in my railcars. I know it's not something done very often, and it's tricky work, but it adds a lot of character.
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 10, 2014, 23:07
Quote from: tedp on February 10, 2014, 22:24
Better still, Brian. What kind of couplers will you fit to the ends?

Just an idea - with both units permanently coupled, it might be possible to add working lights (http://www.009dutch.nl/archive/2005/img/railbus/pict3127.jpg). I did so using LEDs in my railcars. I know it's not something done very often, and it's tricky work, but it adds a lot of character.

the ones fitted for now
as to permanently coupled i would like to be abel to run them as a singal or both togetter depending on how i feel
Title: Re: 3D Printed railcar By Tebee
Post by: Hugh Norwood on February 11, 2014, 09:38
They do look very nice!
Title: Re: 3D Printed railcar By Tebee
Post by: tebee on February 11, 2014, 17:58
Incidentally, you may like to know that these are blatant copies of the Wismar inspired MS casting ones produced in the 70's, though the back of mine is different.

Here is a photo of one of these thoughtfully provided by the ever-useful MickT

(https://forum.009society.com/proxy.php?request=http%3A%2F%2Fi224.photobucket.com%2Falbums%2Fdd239%2FMick6126%2Frailbus2.jpg&hash=c9e40039cedd6cf892057740fbbf9c6433930d31)

Tom
Title: Re: 3D Printed railcar By Tebee
Post by: MickT on February 12, 2014, 11:40
Good grief Tom where did you find that photo?

The MS railcar was one of a pair of unmotorised ones built onto Jouef toastrack coach chassis that came through 009 Sales quite some time ago - I think it is at least 10 years since I took that snap as it was taken in the garden of Brian Guilmant's previous home in Chandlers Ford. Also with this pair of smaller vehicles was one of the larger Donegal style MS railcars mounted onto an N gauge bogie diesel chassis as far as I remember. As far as I know they all sold quickly and are probably still "in service" on somebody's layout!

Mick
Title: Re: 3D Printed railcar By Tebee
Post by: tebee on February 13, 2014, 00:41
You've posted that picture elsewhere on this forum Mick !

Yes it was one of a pair - I have two of the original railcars myself, but one is incomplete. Did try casting off the bits I had, but in the end it was a relativity simple job to recreate them in 3d and greatly expand the range.   

Tom
Title: Re: 3D Printed railcar By Tebee
Post by: MickT on February 13, 2014, 14:58
No problems and no issues Tom, I was merely curious as to where it was unearthed as I knew I had taken the photo years before I started uploading onto my blogsite!

Mick
Title: Re: 3D Printed railcar By Tebee
Post by: Brian Mosby on February 13, 2014, 20:29
heres a video of a test run
http://www.youtube.com/watch?v=cMpS1sOAaVo